–  from A to Z

  • What is a building permit?
    Written decision of the responsible building supervisory authority to approve the building project. The building permit states that the building project applied for may be executed subject to the fulfilment of certain conditions. The conditions depend on the building regulations of the respective federal state. A building permit is limited in time and subject to a fee. Possibly necessary divisional examinations by water management or road construction authorities, exceptions or missing documents can delay the approvals.
  • What special features does the building permit have in development areas?
    Building permit procedures have been simplified in recent years. This helps to speed up the process if the building project is completely in accordance with the development plan and the technical requirements and if the development is secured. The building documents must be submitted to the municipalities. The building application must be submitted with all documents in triplicate. The associated construction plans must be prepared by an authorised person. The local authority checks the application in advance and forwards it to the competent licensing authority. After the examination, the permit can usually be granted after two to three months.
  • What is the purpose of a building specification?
    It explains the techniques and materials used in the realization of a construction project. The building description makes it easier to assess the construction of a building. It is an integral part of the application for a building permit. It is an essential element for many cutting clamps in connection with the project and its execution. With the plan bases, the verbalization of the chosen building materials and constructions finds its use as a performance description in connection with costs and deadlines.
  • What must be observed for the ventilation of the building?
    Health and comfort for the residents are the important goals of any planning. In particular, excellent air quality is essential for this. Good air quality can only be achieved if "stale" air is regularly replaced with fresh outside air. Opening windows twice a day is not enough. Comfort ventilation adjusted to the fresh air requirement is therefore indispensable in every passive house. A regular, secure and sufficient exchange of air in the cold season is only possible with targeted comfort ventilation - this also applies to very ordinary new buildings. Without comfort ventilation, sufficient air exchange in newly built apartments can only be attempted by regular impulse ventilation: To achieve an air exchange rate of about 0.33 times, the windows would have to be fully opened for 5 to 10 minutes at least every three hours - even at night! In reality, much less ventilation is used in practice. The air quality is correspondingly poor and the danger of high humidity increases. Because we have no direct perception of the quality of the air in the room and cannot estimate the amount of fresh air actually supplied through open windows, it is difficult even for a specialist to achieve a "just right" exchange of air through window ventilation. If too little ventilation is provided, the air quality is poor and there is an increased risk of condensation. If too much air is ventilated, the air becomes too dry and excessive energy consumption occurs.
  • What does burglary protection include?
    Under this generic term, all measures are summarized with which one protects oneself against burglaries or which make it more difficult for burglars to gain access to foreign rooms. With windows, increased protection against burglary can be achieved by various measures: - Burglar-resistant glazing - Burglar-resistant fittings - Gears on the window, which protect against break-in attempts

Welcome to ENERsign® Price Configurator with U-Value window Calculation:

You don’t want to go through the trouble of obtaining various offers, but would like to find out the recommended prices and U-values for our high-quality ENERsign®primus window? Then try our price configurator, here you can put together your desired windows as you wish and try out different sizes and designs.

All you need is the desired dimensions and window types and you can configure immediately. The window price and U-value window will be adjusted automatically, so that you always have an overview and can compare directly.

We are uncompromising in the product we offer:
ENERsign®primus elements with at least triple glazing with a U-value glass of 0.52 W/m²K and a g-value of 53%. Other designs and special glasses are available on request.

Welcome to the ENERsign® U-Value window configurator:

The U-value window is also called heat transfer coefficient and according to the standard DIN EN 10077 it indicates the amount of thermal energy lost through a window to the outside.

The U-value window is calculated using the formula W/(m²K), i.e. watts per square metre and Kelvin. This value refers to the entire window and defines the amount of energy per unit of time that flows through an area of one square meter when the air temperature on both sides differs by one Kelvin. The lower this value is, the less energy or heat the window emits.

Add a product
Add a product
Add a product
Add a product

Configure window

Gesamtpreis (inkl. 19% MwSt)
0€ - 0
Potentially avoided CO2 emissions over 30 years :
Potentially saved energy and CO2 costs over 30 years:
Export to Excel
0 (W/m2K)
Please add a product to configure it.