ENERsign

– Front doors

Convincing features >>>

Certified for cold climate zones
by the Passive House Institute Darmstadt: highest Passive House Efficiency Class A

Calculate your Uw-Value

Flush threshold:
The perfectly thermally separated threshold profile from the inside to the outside is critical for optimal thermal insulation

Thermo rigid foam profile:
Thermal foam profile between the wood inside and the aluminum cover shell outside for best insulation values

Wood inside:
slim and elegant frame made of local softwood in spruce (optional in larch or oak)

With the invisibly installed A-opener, the door can be opened comfortably by motor on impulse and, e.g., with a finger printer. Power supply via a tappet contact

Enhanced burglary protection:
The lock locks automatically in the main latch and in two additional locks – even when unlocked

A maximum of safety:
Three to four asymmetrically arranged solid special belts also ensure the best possible safety

Integrated handle bar – functionality meets design
The straight-line appearance harmonizes ideally with the clear lines of the ENERsign® elements and modern architecture

Modern technology, individual design

The certified ENERsign®primus entrance door offers a maximum amount of glass and ensures that the entrance area is flooded with light. Light is life.

The opaque entrance door also meets all requirements, such as driving rain resistance, stability, and burglary protection. The plinth profile is pleasantly low. The threshold height is naturally flush.

Optimal thermal insulation

The sophisticated design of the ENERsign®primus entrance door guarantees a high surface temperature due to the perfectly thermally separated lower leaf profile on the inside. This prevents unfavorable heat loss on the outside – so it stays pleasantly warm in the entrance area.

Security and comfort

Increased burglary protection with the ENERlock system:
The lock automatically locks the front door in the main latch and in two additional locks – one in the upper and one in the lower part of the door. The door is thus locked at three points – a maximum of security, even when unlocked.

Three to four pieces of asymmetrically arranged solid special hinges also provide the best possible security.

With the concealed built-in A-opener, the entrance door can be opened conveniently by motor on impulse, is suitable, e.g., for pushbuttons, as well as for code entry, finger printer, or radio transmitter.

  • Front door:
    • U-value door: 0.64 W/m²K, according to EN 10077 (standard test value)
    • U-value frame: top/sideways 0.64 W/m²K, bottom 1.09 W/m²K, according to EN 10077 (standard test size)
    • Glass edge PSI value: average value 0.021 W/mK
  • Triple-glazing:
    • U-value glass: 0.52 W/m²K, according to EN 673
    • G-value glass: 53 %
    • Light transmission: TL 71 %
  • Edge seal with a warm edge (Swisspacer Ultimate PU)
  • Glass space filled with argon
  • Static glass bonding with all-round airtight masking
  • Three sealing levels
    • (frame, sash, stop) for optimum sound, heat, and sealing values
  • Joint permeability and impermeability to driving rain, according to DIN 18055
  • Increased burglary protection with the ENERlock system:
    • The lock automatically locks the front door in the main latch, as well as in two or four
      further drop latches. It is thus locked at three or five points – a maximum of
      safety, even in an unlocked condition
  • Three to four pieces of asymmetrically arranged solid special belts made of stainless steel also ensure the best possible safety.
  • Optional:
    • Invisible built-in A-opener – the door can be opened comfortably on impulse by motor
    • Suitable, e.g., for pushbuttons, finger printers, code entry, or radio transmitters
  • Stainless steel fitting inside, pull handle outside

Brochure

 

Brochure ENERsign® primus

Here you can download our brochure ENERsign® primus with the current window performance values:

ENERsign® primus Broschure.pdf

 

 

White Papers

 

White Papers for ENERsign® primus

Download here our White Papers on:

 

Request technical drawings

 

Technical drawings ENERsign® primus

To the download section of our ENERsign® primus system sections in .pdf file format.

 

CERTIFICATE – Certified passive house component


Download the Certificate 2022 here:

ENERsign® primus window system:  Certificate ENERsign® primus window system.pdf
ENERsign® primus sliding door:         Certificate ENERsign® primus sliding door.pdf

Download the Certification REPORT 2022 here:

Certificate REPORT ENERsign® primus window system:  Certificate REPORT ENERsign® primus window system.pdf
Certificate REPORT ENERsign® primus sliding door:  Certificate REPORT ENERsign® primus sliding door.pdf 

 

 

Modern technology, individual design

The certified ENERsign®primus entrance door offers a maximum amount of glass and ensures that the entrance area is flooded with light. Light is life.

The opaque entrance door also meets all requirements, such as driving rain resistance, stability, and burglary protection. The plinth profile is pleasantly low. The threshold height is naturally flush.

Optimal thermal insulation

The sophisticated design of the ENERsign®primus entrance door guarantees a high surface temperature due to the perfectly thermally separated lower leaf profile on the inside. This prevents unfavorable heat loss on the outside – so it stays pleasantly warm in the entrance area.

Security and comfort

Increased burglary protection with the ENERlock system:
The lock automatically locks the front door in the main latch and in two additional locks – one in the upper and one in the lower part of the door. The door is thus locked at three points – a maximum of security, even when unlocked.

Three to four pieces of asymmetrically arranged solid special hinges also provide the best possible security.

With the concealed built-in A-opener, the entrance door can be opened conveniently by motor on impulse, is suitable, e.g., for pushbuttons, as well as for code entry, finger printer, or radio transmitter.

  • Front door:
    • U-value door: 0.64 W/m²K, according to EN 10077 (standard test value)
    • U-value frame: top/sideways 0.64 W/m²K, bottom 1.09 W/m²K, according to EN 10077 (standard test size)
    • Glass edge PSI value: average value 0.021 W/mK
  • Triple-glazing:
    • U-value glass: 0.52 W/m²K, according to EN 673
    • G-value glass: 53 %
    • Light transmission: TL 71 %
  • Edge seal with a warm edge (Swisspacer Ultimate PU)
  • Glass space filled with argon
  • Static glass bonding with all-round airtight masking
  • Three sealing levels
    • (frame, sash, stop) for optimum sound, heat, and sealing values
  • Joint permeability and impermeability to driving rain, according to DIN 18055
  • Increased burglary protection with the ENERlock system:
    • The lock automatically locks the front door in the main latch, as well as in two or four
      further drop latches. It is thus locked at three or five points – a maximum of
      safety, even in an unlocked condition
  • Three to four pieces of asymmetrically arranged solid special belts made of stainless steel also ensure the best possible safety.
  • Optional:
    • Invisible built-in A-opener – the door can be opened comfortably on impulse by motor
    • Suitable, e.g., for pushbuttons, finger printers, code entry, or radio transmitters
  • Stainless steel fitting inside, pull handle outside

Brochure

 

Brochure ENERsign® primus

Here you can download our brochure ENERsign® primus with the current window performance values:

ENERsign® primus Broschure.pdf

 

 

White Papers

 

White Papers for ENERsign® primus

Download here our White Papers on:

 

Request technical drawings

 

Technical drawings ENERsign® primus

To the download section of our ENERsign® primus system sections in .pdf file format.

 

CERTIFICATE – Certified passive house component


Download the Certificate 2022 here:

ENERsign® primus window system:  Certificate ENERsign® primus window system.pdf
ENERsign® primus sliding door:         Certificate ENERsign® primus sliding door.pdf

Download the Certification REPORT 2022 here:

Certificate REPORT ENERsign® primus window system:  Certificate REPORT ENERsign® primus window system.pdf
Certificate REPORT ENERsign® primus sliding door:  Certificate REPORT ENERsign® primus sliding door.pdf 

 

 

At a glance

Welcome to ENERsign® Price Configurator with U-Value window Calculation:

You don’t want to go through the trouble of obtaining various offers, but would like to find out the recommended prices and U-values for our high-quality ENERsign®primus window? Then try our price configurator, here you can put together your desired windows as you wish and try out different sizes and designs.

All you need is the desired dimensions and window types and you can configure immediately. The window price and U-value window will be adjusted automatically, so that you always have an overview and can compare directly.

We are uncompromising in the product we offer:
ENERsign®primus elements with at least triple glazing with a U-value glass of 0.52 W/m²K and a g-value of 53%. Other designs and special glasses are available on request.

Welcome to the ENERsign® U-Value window configurator:

The U-value window is also called heat transfer coefficient and according to the standard DIN EN 10077 it indicates the amount of thermal energy lost through a window to the outside.

The U-value window is calculated using the formula W/(m²K), i.e. watts per square metre and Kelvin. This value refers to the entire window and defines the amount of energy per unit of time that flows through an area of one square meter when the air temperature on both sides differs by one Kelvin. The lower this value is, the less energy or heat the window emits.

Casement
Add a product
Fixed
Add a product
French
Add a product
Sliding
Add a product

Configure window

Gesamtpreis (inkl. 19% MwSt)
Information
0€ - 0€
Potentially avoided CO2 emissions over 30 years :
0
Tons
Potentially saved energy and CO2 costs over 30 years:
0€
Export to Excel
Pos.
Type/Name
Width
Height
U-Value
1
Fenster
cm
cm
0 (W/m2K)
Please add a product to configure it.